INVERTER SYSTEM

Highly Effective Protection of Critical Loads on Unstable AC Power The Inverpack inverter system can help reduce system acquisition and installation costs through its compact design and cost-effectiveness. The system provides high quality uninterruptible power supply to the AC load.

    

MAIN CHARACTERISTICS

• High power density
• Pure sine wave 50Hz
• Hot swap
• Wide operating temperature range
• Modular design, provides fast expansion (increase) of capacity and redundancy (increase in reliability) N+1...N+n
• Built-in fast acting electronic static switch - bypass
• Intelligent Controller and WinPower software for system management and remote monitoring

The Inverpack Inverter Module is the basic building block for building modular Inverpack inverter systems. By using the controller, the STS static switch and the manual bypass AC distribution box, inverter systems can be built in a wide output power range from 2 kVA to 12 kVA, without STS up to 24 kVA.

The inverter module Inverpack 1000 converts DC current from a 48V nominal voltage source into a pure sine wave f = 50Hz and a controller-regulated output voltage of 208/220/230/240V AC.

An electronic static bypass switch allows instantaneous switching of power up to 12 kVA between the inverter output and the mains without interrupting the power supply to the load. For this, the system uses a separate 1U shelf with an STS module and a controller.

The user-friendly controller interface and intuitive PC software (web interface) make it easy to manage all major system functions.

1U shelves with inverter modules are designed for installation in 19 '' cabinets or cabinets, and allow the user to easily create systems with an output power from 2 kVA to 24 kVA, and in the case of using a static bypass key from 2 kVA to 12 kVA.

TECHNICAL CHARACTERISTICS OF INVERPACK INVERTER SYSTEM

Input
Voltage	40.5-58V (nominal 48V DC) Low voltage warning: 45V Low Voltage Shutdown: 40V High Voltage Warning: 58V High voltage shutdown: 60V
Input current	Max working current 23A (DC) Max starting current 46A (DC)
Input protection	Reverse polarity protection
Output
Voltage	110V version: 110/115 / 120V alternating current 220V version: 208/220/230 / 240VAC Programmable from the controller
Frequency	50/60 Hz, programmable from the controller
Waveform	Pure sine wave
Power	1000VA
Power factor	0.8
Harmonic distortion	Not more than 3%
Overload capacity	125% continuous (when controlling the temperature inside the module) 150% up to 20 seconds, then shutdown
Dimensions (WxDxH)	215 х 278 х 44 мм (1U)
Load current sharing unit with manual bypass	At the entrance: 6 terminal blocks and bus (-) Output: 9 double-pole circuit breakers MBC 5-position rotary
STS 112 bypass
Voltage	Universal range of input and output voltage (110V / 220V ac)
Switching time	1/4 cycle (less than 5ms)
Working hours	Programmable operating mode (online/offline)
Inverpack controller
Features	Simple user interface 5 programmable alarm output relays (dry contacts) Multilingual (Russian language is not provided yet) Real time clock LED and sound signaling of alarms
Remote access interface	USB, RS232, RS485, optional module RS232/TCP IP
System information
Working temperature	from -20 to + 70 °C
Storage temperature	from -40 to + 85 °C
Humidity:	Operation: 5% to 95% non-condensing Storage: 0% to 99% non-condensing
Acoustic noise	Not more than 55dB (one module)
Standard compliance
Electrical protection	IEC 60950-1 UL 60950 CSA 22.2
Electrical magnetic compatibility	EN 61000-6-1 (immunity, industry) EN 61000-6-2 (immunity, industry) EN 61000-6-3 (emission, light industry) EN 61000-6-4 (emission, industry)
Ecology	ETSI EN 300 019-2 ETSI EN 300 132-2 RoHS